Calculator · Purdue Extension formula

Corn yield calculator (kernel count method)

Estimate corn yield per acre before harvest from an ear and kernel count. The formula is Purdue University's yield component method, and the calculator shows a range for small, average and large kernels.

Corn yield estimator (kernel count)

Count harvestable ears in 1/1,000 acre of row, then kernel rows and kernels per row on every fifth ear.

1/1,000 acre = 17 ft 5 in of row
Larger kernels
—
factor 65
Middle estimate
—
factor 75
Smaller kernels
—
factor 85

Ballpark only: Purdue says this method is probably accurate within plus or minus 20 bushels of the actual yield. Repeat it at several spots in the field; the less uniform the field, the more samples you need.

How the corn yield formula works

Purdue agronomist R.L. Nielsen's yield component method multiplies the number of harvestable ears in 1/1,000 acre by the average number of kernels per ear, then divides by a kernel-weight "fudge factor":

bu/ac = (ears in 1/1,000 acre × kernel rows × kernels per row) ÷ fudge factor

The fudge factor stands for thousands of kernels in a 56-lb bushel. The original value was 90 (90,000 kernels per bushel), but Purdue now suggests running the numbers with 65, 75 and 85, the range most common in the central Corn Belt, and 90 to 100 when grain fill has been stressful. Purdue's trials found anywhere from 67,000 to 94,000 kernels per bushel, with an average of about 76,000.

Purdue's own example: 30 ears in 1/1,000 acre with an average of 511 kernels per ear gives 236, 204 and 180 bu/ac with factors 65, 75 and 85.

Row length for 1/1,000 acre

Divide 43,560 by the row spacing in feet, then by 1,000. For 30-inch rows that is 17.4 feet.

Row spacingRow lengthFeet (decimal)
15 in34 ft 10 in34.8 ft
20 in26 ft 2 in26.1 ft
22 in23 ft 9 in23.8 ft
30 in17 ft 5 in17.4 ft
36 in14 ft 6 in14.5 ft
38 in13 ft 9 in13.8 ft
Check the estimate against your state

A hand count is a single snapshot. Compare it with USDA's state figures on corn yield by state and the corn yield per acre ranking, then put the number into the profit per acre calculator.

Frequently asked questions
How do you figure corn yield by counting kernels?

Count harvestable ears in 1/1,000 acre of row, count kernel rows and kernels per row on every fifth ear, multiply ears by average kernels per ear, and divide by a kernel-weight factor. Purdue suggests factors of 65, 75 and 85, or 90 to 100 after a stressful grain fill.

What is the 1/1,000 acre row length for 30-inch rows?

It is 17.4 feet, about 17 ft 5 in. For other spacings, divide 43,560 by the row spacing in feet and then by 1,000.

How accurate is a kernel count yield estimate?

Purdue says the yield component method is probably only accurate within plus or minus 20 bushels of the actual yield. Accuracy improves with more sample sites, especially in uneven fields.

Why does the calculator show three yields?

Kernel weight is not known until the grain matures, so the formula uses a range of kernel-weight factors. The middle figure uses 75; the other two show what larger or smaller kernels would mean.

More farm calculators
Source: R.L. (Bob) Nielsen, Purdue University Agronomy, "Estimating Corn Grain Yield Prior to Harvest" (Corny News Network, updated August 2021) — formula, kernel-weight factors, 1/1,000 acre row length and the ±20 bu accuracy note. The calculator gives an estimate for planning, not a measured or guaranteed figure.