Calculator · Iowa Department of Agriculture formula

Grain bin capacity calculator

Find how many bushels a round grain bin holds from its diameter and grain depth. The formulas are the ones the Iowa Department of Agriculture's Grain Warehouse Bureau publishes for measuring grain.

Round grain bin capacity

Measure the inside diameter and the grain depth at the side wall.

Leave 0 to use the rule of thumb: radius × 0.4 for corn, × 0.5 for soybeans.
Standard bushels
—
Bushels per foot
—
Peak / cone used
—

Standard (Winchester) bushels at 0.80385 bushels per cubic foot. Grain heavier than standard test weight holds more bushels, and packing adds more; for that accuracy the Iowa Department of Agriculture refers you to pack charts from your county Extension office.

How grain bin capacity is calculated

The Iowa Department of Agriculture and Land Stewardship (Grain Warehouse Bureau) measures a round bin like this:

bushels per foot = diameter × diameter × 0.7854 × 0.80385
standard bushels = bushels per foot × grain depth at the side wall
peak: + (peak height ÷ 3) × bushels per foot · cored down: − (cone depth ÷ 3) × bushels per foot

If you cannot measure the peak, the bureau's rule of thumb for dry, clean grain is the bin radius × 0.4 for corn or × 0.5 for soybeans. Wet grain or grain with many fines makes peaks and valleys higher and deeper.

Example: a 30-ft bin with 24 ft of level grain holds about 13,637 standard bushels (568 bushels per foot).

Grain bin capacity chart

Standard bushels, calculated with the formula above. The last column adds a peak of radius × 0.4.

DiameterBushels per foot20 ft level20 ft + corn peak
15 ft1422,8412,983
18 ft2054,0914,337
21 ft2785,5685,958
24 ft3647,2737,855
27 ft4609,20510,033
30 ft56811,36412,501
33 ft68813,75115,263
36 ft81816,36418,328
42 ft1,11422,27425,392
48 ft1,45529,09233,747
From bushels to dollars

Value stored grain with current crop prices by state, and allow for drying shrink with the corn shrink calculator.

Frequently asked questions
How do you calculate grain bin capacity in bushels?

Multiply diameter × diameter × 0.7854 to get the floor area, times grain depth for cubic feet, and times 0.80385 for standard bushels. Add a third of the peak height (in bushels per foot) for a peaked bin.

How many bushels are in a cubic foot?

The Iowa Department of Agriculture uses 0.80385 standard (Winchester) bushels per cubic foot. Test weight and packing change the real number of bushels.

How do I estimate the peak height of grain in a bin?

For dry, clean grain the Iowa rule of thumb is half the diameter times 0.4 for corn or 0.5 for soybeans. Wet grain or grain with fines piles higher.

Why does my bin hold more bushels than the calculator shows?

Grain packs down under its own weight, and corn heavier than 54 lb or soybeans heavier than 56 lb per bushel give more bushels than standard. County Extension offices have pack charts for exact figures.

More farm calculators
Source: Iowa Department of Agriculture and Land Stewardship, Grain Warehouse Bureau, "How to Measure Your Grain" — round bin, peak and cone formulas, 0.80385 bushels per cubic foot and the peak rule of thumb. The calculator gives an estimate for planning, not a measured or guaranteed figure.